******
- Verified Buyer
Especially for the price, this is a pretty darn cool product.The 1 star critiques I read:Difficult assembly. I did not find this to be the case at all. I thought the design is pretty slick and I had it together in about five minutes after opening the box.Not sturdy, flimsy material. Based on these I expected a lazer cut balsa kit. However this is a pressed board that is more than sturdy enough for the application and I am not even sure how you could break it during assembly as long as you take just the base care as with any product assembly.Paints don't fit. Look at the pictures. They literally have pictures of which style of paint this is for.All in all super happy and wish I had gotten this sooner. Will definitely get another when my paint collection grows.This is a pretty solid paint rack.It has 52 holes to put dropper bottle style paints in- like Vallejo, Army painter, or War Colours style bottles. It even has a top row of larger holes that fit the 32ml bottles like the fancy Vallejo metal colors air brush paints come in. Citadel paints would also fit this row, but there is only one row of 8 slots so if you're citadel exclusive this paint rack wouldn't work for you. Not only that but the top row also has a place to store paint brushes- a whole lot of them- so unless you use more than 22 paint brushes simultaneously there'll be a place on this rack to store all you need for any particular project.There are several things I really like about this paint rack. First off it's much cheaper than other similar mdf paint racks I've seen.Another thing I liked was that you don't need glue to assemble this rack as it uses plastic clips to hold it together. It's clearly not as sturdy as one that was glued together would be, but being able to take it apart and store it is a nice option that I've not seen in a rack of this type. That being said it's plenty solid and I don't think there would be any issue with moving it around even while full of paint.Yet another thing I like is that the mdf is coated with a faux wood grain veneer- i think it's vinyl. While I could care less how it looks, and it looks fine, the fact that it's covered with a water resistant layer makes it more durable with regards to water damage and certainly makes it easier to keep it clean. Just wipe it off if, like me, you are a bit messy with your paints.All in all I can easily recommend this paint rack.I used krazy glue as an extra way to holding the pieces together. That said the clips are super for making this go together and staying together.I purchased another model of rack without clips and that was a pain to hold together... (There may have been a couple manly tears, and glued together fingers)But none of that here. I may buy another if was so great.This is perfect for my alcohol inks and glitter. I had a heck of a time putting it together though.I have other paint organizers that cost much more. I wish I had found this one before spending the money on others. The instructions were very easy to follow and all parts fit well. I did add super glue to the joints to increase the sturdiness of the product.A little tricky to assemble, but it gets the job done! The smaller holes fit Vallejo and other eye-dropper paints (though some holes need a bit of sanding or else they’re too tight), the larger holes fit large Vallejo bottles and small Tamiya bottles; the large Tamiya bottles don’t fit.I don’t expect this thing to survive too many falls, but it’s overall a very good rack for the money.It works, easy to assemble and has more storage than offered on Amazon for the size and price. A second one might be order pending bottle sizes. No Brainer if I would buy again.I only got 9 clips instead of 16. Product us good. Please double check before packing otherwise its a wasteWell, the description for this says it’s a paint stand – but I sew more than I paint, and what I saw is a cotton reel display holder for my craft room. It’s not as well made as I’d hoped, though when requesting this only a very brief description was available through Vine, with no link to a product page, and no sign of pricing information. This arrived flat packed and needed to be slotted together – generally very easy – with the connected panels held in place using little clear plastic clips. I had my drill/driver ready to go, but no tools were required. Parts were easy to identify and diagrammatic instructions clear.The panels are quite thin – only a few mm thick and don’t feel the sturdiest/best quality, but for paints (or my cottons) handled gently, this seems as though it will be fine. The wood effect finish is only applied to the sides of each panel, the ends are bare MDF. The paint pot holes are a really good size for cotton reels – deep enough to hold them without them toppling over, shallow enough that the reels are still easy to access. There are also little drilled holes designed to hold paintbrushes. These work quite well as storage for crochet hooks too. Overall, I’m quite pleased with this little stand, but would want to know the price before I’d be prepared to consider awarding a higher rating.This is simply made but very ingenious , fits together sturdily which i have tried to show in the pics how it goes together easiest. I found lying it on its side was best. It is surprisingly sturdy and there are little plastic clips supplied to keep everything in place, these work really well to ensure it stays together.As you can see it holds a lot!.It's a handy holder for many things in my opinion, i did try paints and brushes in it, paint tubes and tubs were fine but some of my larger brushes wouldn't fit in the holes designed for them (about the diameter of a slim pencil),My art supplies tend to be on the larger side, and although this shelf is excellent for smaller items, i found i needed slightly larger holes for any brushes wider than, say a 6mm drill bit.I wish i had the ammount of art supplies you would need to fill this up but for now i am still collecting,so in the end i used it for my make-up, (for now) and i have to say it works mostly brilliantly either way!.the whole thing measures 15" (38cm) in length, by 8" (20cm) in depth, the holes measure 1" (a little under 3cm). At its tallest point is 5" (12cm), the gap between shelves is an inch and a half (4cm).The shelf arrived very quickly and well packaged.I hope you find this review helpful.This is an assemble yourself paint/paint brush rack but thankfully is quite easy to assemble. Once assembled, it is sturdy and looks very professional; I was pleasantly surprised at how durable this appears to be considering it is from the AmazonBasics range. This is a medium rack but big enough to hold a lot of paint/paint brushes - a really handy tool. The price appears reasonable and I’d recommend for painters!This item arrived safe and well packaged.This is a very simple but effective paint pot holder. With 64 different holes perfectly cut into this stand there is space for every colour of paint you could ever need! This makes them super simple to find and easy to access too.This has been perfectly cut from MDF, and it slots together with ease.I highly recommend this product.
